| |
|
 |
The AM120 is a powerfull module that can comply with most of the requirements set for any automotive track and trace and stand-alone applications.
General specifications of the AM120
Based on long term experience using up-to-date technology
Prepared for DT120, enabling WMCS embedded message system
Fixed baud rate configurable to match terminal equipment speed
External NMEA signal can be used for a PDA in-car navigation
Easy remote control from the server over the GPRS network
Flexible Configuration & Operation
Three configurable sockets for main, backup, and logging server
Data transfer by UDP and/or TCP
Auto reconnect after connection drop.
Standard Hands Free Voice Prepared
Embedded rechargable backup Battery (1.7Ah/3.6V Li-Ion)
Report logging up to 12000 Reports
Enclosure size: 132 mm x 65 mm x 26 mm (L x W x H)
Operating temperature Range: -20 ºC to +70 ºC
RoHS compliant (green)
Approvals: E, CE, FCC
Inside the AM120
Motorola G24 quad band module (class-B, Multy-slot class 10)
Navman Jupiter 20S (high sensitivity)
Sensitive Accelerometer (X/Y dimension)
Processor evalutated and controlled LED’s
Operating voltage 12-42V, load dump protected
Integrated iButton interface (unique driver identification)
Battery Charger and Power Management
Low Power Standard Operation (average 60mA @ 14V)
Ultra Low Power Operation in Sleep mode (average 10 µA)
Six inputs, all fully automotive protected:
> 1 Ignition input - Supports / Generates low power mode
> 1 digital counter input
> 4 digital and/or analog (0-3V, 12 bits resolution) inputs
Two Opto-Isolated Steady State Relay Outputs (50V/800mA)
Six independent serial communication channels (3 external ports)
Expansion Slot (Zigbee or other customized devices)
SIM Card Reader Holder
Connecting the AM120
SMA antenna connectors (GSM and active 3.3V GPS)
Adjustable microphone signal conditioned standard input
Adjustable Class-D Audio Power Amplifier output (1.4W @ 4Ω)
Robust All-In-One 12 pins connector
Inputs: Ignition, Counter, 4 digital/analogue
Outputs: Dual Pole Optical Steady State Relays (50V/800mA)
Main Power Supply 12/24/42V systems
Battery Power Output for sensible sensors (3.6V nominal)
COM1, COM2 (DB9 connector female):
> full duplex RS232, RTS/CTS, 1200-115000 bps
> RTS/CTS flow control
> Power Output (5V)
COM3 (RJ45 connector):
> full duplex RS232, 1200 - 57600 bps
> Power Output (5V)
> iButton® or one wire temperature sensor (Dallas protocol)
> direct NMEA output(9600 bps)
> Smooth connection to WMCS DT120 data terminal
> External Module Reset - Active high
Functionality of the AM120
GPRS based Tracking & Tracing
TCP/UDP socket for main server
Separate UDP socket for backup server
Separate UDP socket for logging or copy server
Separate UDP/TCP socket for over-the-air firmware updates
Interval based optional main server socket Ping control
Taylored report format definition (such as: verbose, terse, Id's, GPS extractions, digital/analog input status, output status, accelerometer, i-button, user specific report field)
Adjustable Time-Scheduled report with full status, coordinates, sensor status, and control outputs
Adjustable Elapsed Distance report (example: every 10 km a full status report is send to Remote server)
Flexible awake /sleep conditions )
Extensive alarming system (like: ignition, start/stop, geo-fencing, input triggers, motion sensor, counter, low battery)
Geo fencing (up to 8 fences - entering or leaving)
Text messages from attached terminal to server or from server to attached terminal
Pseudo transparancy to all external com ports
Report / Alarm storage in case of no GPRS coverage, main server down, or during Voice call
Remote commands to adjust user settings and output controls
Emengency SMS-based remote command support
Free WMCS© MS-Windows® based programs
Control Cosole for configuring the AM120
Hardware / software module programming
Auxiary terminal windows
Over-the-air Remote programmer
Demo TCP server
Demo UDP server
|
|
PRODUCT HIGLIGHTS
|
